Cat6 UTP, 23 AWG Outdoor Cable Roll 4 Pairs - Solid PE
Description
4-Pair Category 6 solid cables (U/UTP) has been designed for outdoor applications and is suitable for outdoor duct installations. The cable supports 1G Ethernet networking, fully supporting the more demanding office communications including voice, data, VoIP, Video Conferencing, Security, IP based cameras and other demanding real time applications.
The cable covers the category 6 requirements for unshielded twisted pair cables of 100 Ω and is characterized up to 250 MHz suitable for transmitting data over local area networks (LANs).
The cable’s 8 conductors (4-Pairs) are of solid bare copper with high density polyethylene (HDPE) insulation and a UV stabilized polyethylene (PE) weather resistant jacket. Two insulated conductors are twisted together to form a pair and the four pairs with different twist ratio are laid up to form the basic cable unit. The four pairs are wrapped with an overall polyester tape for extra protection.
Feature & Benefits:-
- Category 6/Class E compliant
- PE jacket material
- Reliable performance
- IEC 61156-5, EN 50288-6-1
- Super-standard performance margin
- Compliant to ISO/IEC 11801 Ed 2.2, ANSI/TIA- 568-C.2, EN 50173-1
Feature & Benefits:-
- Outdoor Cabling
- 4/16 Mbps Token Ring (IEEE 802.5)
- 10/100/1000 BASE-T (IEEE 802.3)
- 155 Mbps 1.2G ATM
- 100 Mbps TP-PMD
- Analogue Voice, ISDN, ADSL
- HVAC alarm systems and other signaling
Standards:-
- ANSI/TIA-568-C.2
- ISO/IEC 11801:2011 (Ed 2.2) Class E
- IEC 61156-5
- CENELEC EN 50173-1:2011
- EN50288-6-1
Environmental Data:-
|
Temperature range |
Value |
|
Operation |
-20˚C to +75˚C |
Technical Data:-
|
Mechanical data |
Value |
|
Dimensions (W x D x H) |
See technical drawing |
|
Material |
Conductive material - Solid bare copper Conductive insulation – HDPE Inner screening material - Polyester Cable jacket - PE |
|
Conductor diameter |
23 AWG |
|
Insulated conductor diameter |
1.02 ± 0.03 mm |
|
Outer cable diameter |
6.7 ± 0.5 mm |
|
Jacket thickness |
0.60mm ± 0.05 mm |
|
Pulling strength |
110N |
|
Minimum bend-radius |
4 times outer diameter |
Electrical Data:-
|
Frequency (MHZ) |
RL (≥dB) |
ATT 20˚C (≤dB) |
NEXT (≥dB) |
NEXT PS NEXT (≥dB) |
ELFEXT (≥dB) |
PSELFEXT (≥dB) |
|
1 |
20.0 |
2.03 |
74.3 |
72.3 |
67.8 |
64.8 |
|
4 |
23.0 |
3.78 |
65.3 |
63.3 |
55.8 |
52.8 |
|
8 |
24.5 |
5.32 |
60.8 |
58.8 |
49.7 |
46.7 |
|
10 |
25.0 |
5.95 |
59.3 |
57.3 |
47.8 |
44.8 |
|
16 |
25.0 |
7.55 |
56.2 |
54.2 |
43.7 |
40.7 |
|
20 |
25.0 |
8.47 |
54.8 |
52.8 |
41.8 |
38.8 |
|
25 |
24.3 |
9.51 |
53.3 |
51.3 |
39.8 |
36.8 |
|
31.25 |
23.6 |
10.67 |
51.9 |
49.9 |
37.9 |
34.9 |
|
62.5 |
21.5 |
15.38 |
47.7 |
45.4 |
31.9 |
28.9 |
|
100 |
20.1 |
19.80 |
44.3 |
42.3 |
27.8 |
24.8 |
|
200 |
18.0 |
29.98 |
39.8 |
37.8 |
21.8 |
18.8 |
|
250 |
17.3 |
32.85 |
38.3 |
36.3 |
19.8 |
16.8 |
|
Electrical characteristics |
Value |
|
DC resistance max |
9.38 Ohm/100m |
|
DC resistance unbalance |
Max 5% |
|
Mutual capacitance |
Max 5.6 nF/100m |
|
Capacitance unbalance pair |
Max 330pF/100m |
|
Impedance 1-250 MHz |
100 ± 15ῼ |
|
Propagation delay |
Max. 536 ns/100m @ 250 MHz |
|
Dielectric strength |
DC KV/sec. 2.5/2 |
|
Propagation delay skew |
Max 45 ns/100m |
|
Insulation resistance - MΩ/km |
Min.5000 |
|
Nominal velocity of propagation |
69% |
Ordering Information:-
|
Part No. |
Description |
|
ANC6UPBK23-305MT-PE |
Cat 6 (U/UTP), 4 Pairs, Solid PE, Outdoor Cable, 305m |
Write a review
Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
